Imagen de portada de Amazon
Imagen de Amazon.com
Imagen de Google Jackets
Imagen de OpenLibrary

Innovation and technologies in construction: Selected papers of buildintech bit 2022/ Sergey Vasil'yevich Klyuev

Por: Colaborador(es): Tipo de material: TextoEditor: Springer 2023Descripción: 409 páginas; Figuras, tablas; 25.5 cmTipo de contenido:
Tipo de medio:
  • sin mediación
Tipo de soporte:
  • volumen
ISBN:
  • 9783030546519
Clasificación CDD:
  • 21 690 V328 2023
Contenidos:
High-efficiency wall materal based on technogenic aluminosilicate rawmaterials -- modernization ofthe mill's working bodies for the production of fine building materials -- Using of citrogypsum in alkali activated systems -- Efficiency if stabilization of sandy, coarse-grained and technologenic soils with polymer complexes and surfactants of structural layers of highways -- Investigation of gas release processes in a polymer composite filled with amorphous boron under thermal and radiation exposure -- Obtaining energy efficiente polymer-birumen binders using polymer-bitumen binders using polymer-bitumen concentrate -- Effect of cyclic loading level on elastic-strength characteristics and kinetics of damage accumulation in polymers -- Research methods for flame retardant and constructuon and technological properties of protective cnstruction and technological properties of protective coatings -- Methodology for the selectión of optimal parameters of the finite element mesh in compsite materials calculation -- Review study of recycled aggregate concrete coumn under eccentric loading -- Surface modification of ZrH2 with an organosilicon oligmer -- Formation of copper coating on the surface of titanium hydride using quadruple magnetron sputtering -- Investigating of the residual stresses during the extraction of a polymer product from an extruder -- Compatibility of polymer and plsticizer-as a key factor in the formation of degradation-resistant bituminous binder -- Improving the method of assessing the bearing capacity of complex technical systemms -- Optimization o foam fiber concrete mix desing by mathematical modeling -- Analysis of intermdiates produced during the synthesis of Alkyd resins -- Surface structure of modified titanium hydride fraction -- Optimization of paramenters for the production of gypsum binders based on gypsum-containing waste -- Heat-shielding properties of concrete structures reinforced with composite reinforcement -- Eosive wear of alumina coated plyimide composite -- Biological and climatic resistance of cement composites based on biocidal binders -- calculation of the parameters of the grinding load in a ball-tube mill for the production of construction materials -- Dynamic behavior of an "earth dam-foundation" plane system within wave theory -- Effect of plasma blast furnace slag treatment on properties of blast furnace slag-cement mortar -- Mechanical, tribological, and anticorrosion properties of the coating produced by magnetron sputtering of a Ni-Cr-B4C compsite target -- Corretation of bitumen emulsion stability factor with aqueous phase parameters evaluated at the stage of composition design -- Electrochemical co-depsition of copper and nanodispersed tungsten carbide on titanium hydride -- Light-colored ceramic products from red-burning clay raw materials -- On the effect of operating conditions on the coupling of non-metallic external reinforcement with reinforced concrete structure -- Research study of mixing processes in the pneumatic mixer for dry construction mixes -- Improving the calculation of variable cross section compressed wooden bars stability -- Characterization of a polymer composite withs a hybrid filler -- Finite element modling of the work of bent reinforced concrete elements of rectangular section in the abaqus software environment -- Clay-slag autoclaved composite material with the usage of activated aluminosilicate raw materials -- cellular concrete mixes with bentonite suspension -- Foundation type influence on the construction site seismicity -- model of the catastrophic stage of wood damage accumulation under uniaxial compression -- Improving the opertional reliability of complex technical systems operting in corrosive conditions -- Power calculation of ball-tube mill drives in the construction materials industry -- Calculation of reliability of beam with corrugated wall with limited information about the controlled parameters at the stage of operation -- White cement clinker roasting intensification -- The influence of electric current on the water separation of cements -- Analysis of the effect of cyclic loading mode on the change in the properties of polymer materials -- Mofification of properties and study of electrical conductivity of citrogypsum -- Improving the quality of building materials due to the effect of shear deformation on the parameters of the grinding process -- Water-resistant clay and slag coposite material of autoclaved hadening -- The study of the patterns of soil contact with a solid suface -- Stress-strain state simulation for the eccentrically compressed reinforced concrete columns with local prestress at the manufacturing stage -- Filled plyurethane foam with improved qulity indicarors -- Autror index.
Etiquetas de esta biblioteca: No hay etiquetas de esta biblioteca para este título. Ingresar para agregar etiquetas.
Valoración
    Valoración media: 0.0 (0 votos)
Existencias
Imagen de cubierta Tipo de ítem Biblioteca actual Biblioteca de origen Colección Ubicación en estantería Signatura topográfica Materiales especificados Info Vol URL Copia número Estado Notas Fecha de vencimiento Código de barras Reserva de ítems Prioridad de la cola de reserva de ejemplar Reservas para cursos
Libro Biblioteca Juliaca Sala principal Colección General 690 V328 2023 (Navegar estantería(Abre debajo)) e1 Disponible FJ13317

Referencias: 405 - 406

High-efficiency wall materal based on technogenic aluminosilicate rawmaterials -- modernization ofthe mill's working bodies for the production of fine building materials -- Using of citrogypsum in alkali activated systems -- Efficiency if stabilization of sandy, coarse-grained and technologenic soils with polymer complexes and surfactants of structural layers of highways -- Investigation of gas release processes in a polymer composite filled with amorphous boron under thermal and radiation exposure -- Obtaining energy efficiente polymer-birumen binders using polymer-bitumen binders using polymer-bitumen concentrate -- Effect of cyclic loading level on elastic-strength characteristics and kinetics of damage accumulation in polymers -- Research methods for flame retardant and constructuon and technological properties of protective cnstruction and technological properties of protective coatings -- Methodology for the selectión of optimal parameters of the finite element mesh in compsite materials calculation -- Review study of recycled aggregate concrete coumn under eccentric loading -- Surface modification of ZrH2 with an organosilicon oligmer -- Formation of copper coating on the surface of titanium hydride using quadruple magnetron sputtering -- Investigating of the residual stresses during the extraction of a polymer product from an extruder -- Compatibility of polymer and plsticizer-as a key factor in the formation of degradation-resistant bituminous binder -- Improving the method of assessing the bearing capacity of complex technical systemms -- Optimization o foam fiber concrete mix desing by mathematical modeling -- Analysis of intermdiates produced during the synthesis of Alkyd resins -- Surface structure of modified titanium hydride fraction -- Optimization of paramenters for the production of gypsum binders based on gypsum-containing waste -- Heat-shielding properties of concrete structures reinforced with composite reinforcement -- Eosive wear of alumina coated plyimide composite -- Biological and climatic resistance of cement composites based on biocidal binders -- calculation of the parameters of the grinding load in a ball-tube mill for the production of construction materials -- Dynamic behavior of an "earth dam-foundation" plane system within wave theory -- Effect of plasma blast furnace slag treatment on properties of blast furnace slag-cement mortar -- Mechanical, tribological, and anticorrosion properties of the coating produced by magnetron sputtering of a Ni-Cr-B4C compsite target -- Corretation of bitumen emulsion stability factor with aqueous phase parameters evaluated at the stage of composition design -- Electrochemical co-depsition of copper and nanodispersed tungsten carbide on titanium hydride -- Light-colored ceramic products from red-burning clay raw materials -- On the effect of operating conditions on the coupling of non-metallic external reinforcement with reinforced concrete structure -- Research study of mixing processes in the pneumatic mixer for dry construction mixes -- Improving the calculation of variable cross section compressed wooden bars stability -- Characterization of a polymer composite withs a hybrid filler -- Finite element modling of the work of bent reinforced concrete elements of rectangular section in the abaqus software environment -- Clay-slag autoclaved composite material with the usage of activated aluminosilicate raw materials -- cellular concrete mixes with bentonite suspension -- Foundation type influence on the construction site seismicity -- model of the catastrophic stage of wood damage accumulation under uniaxial compression -- Improving the opertional reliability of complex technical systems operting in corrosive conditions -- Power calculation of ball-tube mill drives in the construction materials industry -- Calculation of reliability of beam with corrugated wall with limited information about the controlled parameters at the stage of operation -- White cement clinker roasting intensification -- The influence of electric current on the water separation of cements -- Analysis of the effect of cyclic loading mode on the change in the properties of polymer materials -- Mofification of properties and study of electrical conductivity of citrogypsum -- Improving the quality of building materials due to the effect of shear deformation on the parameters of the grinding process -- Water-resistant clay and slag coposite material of autoclaved hadening -- The study of the patterns of soil contact with a solid suface -- Stress-strain state simulation for the eccentrically compressed reinforced concrete columns with local prestress at the manufacturing stage -- Filled plyurethane foam with improved qulity indicarors -- Autror index.

2da Esp. Segunda Especialidad De En Fermería En Cuidado De La Persona Con Diabetes Con Mención En Educación En Diabetes

2da Esp. Segunda Especialidad En Enfermería En Perfusión Extracorpórea Y Asistencia Circulatoria

2da Esp. Segunda Especialidad En Enfermería En Oncología

2da Esp. Segunda Especialidad En Enfermería En Neurología Y Neurocirugía

2da Esp. Segunda Especialidad De Enfermería En Gíneco Obstetricia

2da Esp. Segunda Especialidad En Enfermería En Gestión De Central De Esterilización

2da Esp. Segunda Especialidad De Enfermería En Cuidados Quirúrgicos Con Mención En Recuperación Posanestésica

2da Esp. Segunda Especialidad En Enfermería En Centro Quirúrgico

2da Esp. Segunda Especialidad En Asesoría Genética En Enfermería Oncológica

2da Esp. Segunda Especialidad De Enfermería En Cuidados Intensivos

2da Esp. Segunda Especialidad En Salud Ocupacional

2da Esp. Segunda Especialidad En Enfermería En Pediatría

2da Esp. Segunda Especialidad En Enfermería En Cuidados Quirúrgicos Con Mención En Traumatología Y Ortopedia

2da Esp. Segunda Especialidad En Enfermería En Cuidados Quirúrgicos

2da Esp. Segunda Especialidad En Enfermería En Cuidados Intensivos Pediátricos

2da Esp. Segunda Especialidad En Enfermería En Cuidados Intensivos Neonatales

2da Esp. Segunda Especialidad En Enfermería En Cuidado Integral Infantil

2da Esp. Segunda Especialidad De Enfermería En Nefrología

2da Esp. Segunda Especialidad De Enfermería En Geriatría

2da Esp. Segunda Especialidad De Enfermería En Emergencias Y Desastres

2da Esp. Segunda Especialidad De Enfermería En Cirugía Cardiovascular

2da Esp. Segunda Especialidad De Enfermería En Cardiología

2da Esp. Segunda Especialidad De Enfermería En Administración Y Gestión

Doctorado En Salud Pública (Presencial)

Doctorado En Ingeniería De Sistemas (Presencial)

Doctorado En Enfermería (Presencial)

Doctorado En Administración De Negocios (Presencial)

Maestro en Maestría En Salud Pública Con Mención En Salud Colectiva Y Promoción De La Salud (Presencial)

Maestro en Maestría En Salud Pública Con Mención En Gestión De Los Servicios De Salud (Presencial)

Maestro en Maestría En Psicología Clínica Y De La Salud (Presencial)

Maestro en Maestría En Nutrición Humana Con Mención En Nutrición Vegetariana (Presencial)

Maestro en Maestría En Nutrición Humana Con Mención En Nutrición Clínica (Presencial)

Maestro en Maestría En Ingeniería De Sistemas Con Mención En Ingeniería De Software (Presencial)

Maestro en Maestría En Ingeniería De Sistemas Con Mención En Dirección Y Gestión De Tecnologías De Información (Presencial)

Maestro en Maestría En Ingeniería Ambiental (Presencial)

Maestro en Maestría En Enfermería Con Mención En Administración Y Gestión (Presencial)

Maestro en Maestría En Auditoría Con Mención En Auditoría Integral (Presencial)

Maestro en Maestría En Administración De Negocios Con Mención En Finanzas (Presencial)

Maestro en Maestría En Administración De Negocios Con Mención En Administración De Recursos Humanos (Presencial)

Bachiller en Psicología (Presencial)

Bachiller en Nutrición Humana (Presencial)

Bachiller en Medicina Humana (Presencial)

Bachiller en Marketing Y Negocios Internacionales (Presencial)

Bachiller en Ingeniería De Sistemas (Presencial)

Bachiller en Ingeniería De Industrias Alimentarias (Presencial)

Bachiller en Ingeniería Civil (Presencial)

Bachiller en Ingeniería Ambiental (Presencial)

Bachiller en Enfermería (Presencial)

[pendiente licencia SUNEDU] 2da Esp. Enfermería en Gestión en Inmunizaciones

Doctorado En Ciencias Contables Y Financieras (Presencial)

Bachiller en Odontología (Presencial)

Maestro en Maestría Bim Facility Management (A Distancia)

Bachiller en Tecnología Médica, Especialidad De Laboratorio Clínico Y Anatomía Patológica (Presencial)

Bachiller en Ingeniería Industrial (Presencial)

Bachiller en Ingeniería De Ciberseguridad (Presencial)

Bachiller en Ingeniería De Ciencia De Datos E Inteligencia Artificial (Presencial)

Bachiller en Ingeniería De Software (Presencial)

Bachiller en Contabilidad, Gestión Tributaria Y Aduanera (Presencial)

Bachiller en Arquitectura Y Urbanismo (Presencial)

Bachiller en Administración (Presencial)

Bachiller en Administración Con Mención En Gestión Empresarial (Presencial)

No hay comentarios en este titulo.

para colocar un comentario.